Speed limiter
System which prevents the vehicle from exceeding the speed programmed by the driver. When the programmed speed limit is reached, pressing the accelerator pedal in the normal manner no longer has any effect.
The speed limiter is switched on manually: the programmed speed must be at least 20 mph (30 km/h).
The speed limiter is s witched off by manual operation of the control.
The programmed speed can be exceeded temporarily by pressing the accelerator firmly. To return to the programmed speed, simply slow down to a speed below the programmed speed.
The programmed speed remains in the memory when the ignition is switched off.
The speed limiter cannot, in any circumstances, replace the need to respect speed limits, nor can it replace the need for vigilance and responsibility on the part of the driver.
See also:
Starting the engine
Insert the key in the ignition switch. The system recognises the starting code.
Turn the key fully towards the dashboard to position 3 (Starting).
When the engine starts, release the key. ...
Advice on care and maintenance
Recommendations on the care and maintenance your vehicle are given in the servicing
booklet.
Matt paint
If you vehicle is finished with a clear matt lacquer, please observe the following
recomme ...
Arrange your boot
3 position adjustable boot
Low position (150 kg max).
To release the floor, push slightly forwards then raise.
Use the stops A , placed on each side of the boot to change the height of the floo ...