Exceeding the programmed speed
Intentional or unintentional exceeding of the programmed speed results in flashing of this speed in the screen.
Return to the programmed speed, by means of intentional or unintentional deceleration of the vehicle, automatically cancels the flashing of the speed.
See also:
"ISOFIX" mountings
Your vehicle has been approved in accordance with the new ISOFIX regulation .
The seats, represented below, are fitted with regulation ISOFIX mountings:
There are three rings for each seat:
- t ...
Boot lamp
This comes on automatically when the boot is opened and switches off automatically
when the boot is closed.
Different lighting times are available:
- when the ignition is off, approximately te ...
Towing another vehicle
On the rear bumper, unclip the cover by pressing at the bottom.
Screw the towing eye in fully.
Install the towing bar.
Switch on the hazard warning lamps on both vehicles.
Move off gently ...