Manual guide-me-home lighting

Temporarily keeping the dipped beam headlamps on after the vehicle's ignition has been switched off makes the driver's exit easier when the light is poor.

Switching on

Switching on

With the ignition off, "flash" the headlamps using the lighting stalk.
A further "headlamp flash" switches the function off.

Manual guide-me-home lighting is also available from the remote control lighting

Manual guide-me-home lighting is also available from the remote control lighting button (see "Access - Remote control").

Switching off

The manual guide-me-home lighting switches off automatically after a set time.

    See also:

    Unlocking the vehicle Complete unlocking
    Using the key Turn the key to the front of the vehicle to unlock the vehicle. Using the remote control Press the open padlock to unlock the vehicle. Unlocking is confirmed by rapid flashing of ...

    Changing a fuse
    Before changing a fuse: the cause of the failure must be identified and rectified, all electrical consumers must be switched off, the vehicle must be immobilised with the ignition off, ident ...

    Switching the engine off
    Immobilise the vehicle. Turn the key fully towards you to position 1 (Stop) . Remove the key from the ignition switch. Free wheeling For safety reasons, do not free wheel. If free wheeling, ...