Locations for child seats secured with the seat belt
In accordance with the European regulation, this table indicates the options for the installation of child seats secured using the seat belt and universally approved (a) in relation to the weight of the child and the seat in the vehicle.
(a) Universal child seat: child seat which can be installed in all vehicles using
the seat belt.
(b) Group 0: from birth to 10 kg. Infant car seats and "car cots" cannot be installed
on the front passenger seat.
(c) Consult the legislation in force in your country before installing your child
on this seat.
U: seat suitable for the installation of a child seat secured using the seat belt
and universally approved "rear facing" and/or "forward facing".
U (R): as for U, the vehicle seat must be adjusted to the highest and furthest back
position.
See also:
Deactivation
At any time, press the "ECO OFF" switch to deactivate the system.
This is confirmed by the switch warning lamp coming on accompanied by a message
in the screen.
If the system has been ...
Stop & Start
Going into engine STOP mode
The "ECO" warning lamp comes on in
the instrument panel and the engine automatically goes into standby, with a 6-speed
electronic gear control gearbox and a ...
Coolant temperature gauge
With the engine running, when the needle is:
- in zone A , the temperature is correct,
- in zone B, the temperature is too high; the maximum temperature and the central
STOP warning lamps come o ...