Towing another vehicle

  • On the rear bumper, unclip the cover by pressing at the bottom.
  • Screw the towing eye in fully.
  • Install the towing bar.
  • Switch on the hazard warning lamps on both vehicles.
  • Move off gently, drive slowly and for a short distance.
    See also:

    Stop & Start
    Going into engine STOP mode The "ECO" warning lamp comes on in the instrument panel and the engine goes into standby: - with a manual gearbox , at speeds below 12 mph (20 km/h), when you ...

    Folding the backrest
    Move the corresponding front seat forward if necessary. Check that the corresponding seat belt is positioned correctly against the backrest and buckle it. Place the head restraints in the ...

    Exterior welcome lighting
    The remote switching on of the lighting makes your approach to the vehicle easier in poor light. It is activated according to the level of light detected by the sunshine sensor. Switching on Pr ...