Passenger doors

  • On the rear doors, check that the child lock is not on.
  • Remove the black cap located on the edge of the door, using the key.
  • Insert the key into the aperture without forcing, then without turning, move the latch sideways towards the inside of the door.
  • Remove the key and refit the cap.
    See also:

    Reduction of CO2
    The reduction of CO2 emissions was one of the main objectives of this project. This resulted in a search for environmental efficiency at all levels. All factors influencing fuel consumption were o ...

    Welcome lighting
    When the light is poor, detected by a sensor, the remote switching on of the dipped headlamps and sidelamps makes your approach to the vehicle easier. This function can be programmed via the conf ...

    Changing a fuse
    Procedure for replacing a faulty fuse with a new fuse to rectify a failure of the corresponding function. Access to the tools The extraction tweezer is fitted to the back of the dashboard fusebo ...