Directional lighting

When the dipped or main beam headlamps are on, this function enables the light beams to provide improved lighting of the side of the road when cornering.

The use of this function, from approximately 12 mph (20 km/h) and associated with the xenon headlamps only, considerably improves the quality of your lighting when cornering.

with directional lighting

without directional lighting

without directional lighting

Programming

Programming

The function is activated or deactivated via the vehicle configuration menu.

The function is activated or deactivated via the vehicle configuration menu.

Operating fault

If a fault occurs, this warning lamp fl ashes in the instrument panel, accompanied

If a fault occurs, this warning lamp fl ashes in the instrument panel, accompanied by a message in the screen.

Contact a PEUGEOT dealer or a qualified workshop.

low speed or when reverse gear is engaged, the function is inactive. When stationary or moving at very low speed or when reverse gear is engaged, the function is inactive.

The status of the function remains in the memory when the ignition is switched off.

    See also:

    Front map reading lamps
    With the ignition on, press the corresponding switch. Take care to avoid leaving anything in contact with the courtesy lamp. ...

    Stopping the vehicle
    Before switching off the engine, you can change to position N to be in neutral. In this case, you must apply the parking brake to immobilise the vehicle. ...

    Sequential mode
    After starting the vehicle, select position M to change to sequential mode. AUTO disappears and the gears engaged appear in succession in the instrument panel. The gear change commands are only c ...