Changing a wiper blade
Before removing a front wiper blade
Within one minute after switching off the ignition, operate the wiper stalk to position the wiper blades vertically on the windscreen.
Removing
Raise the corresponding wiper arm.
Unclip the wiper blade and remove it.
Fitting
Put the corresponding new wiper blade in place and clip it.
Fold down the wiper arm carefully.
After fitting a front wiper blade
Switch on the ignition.
Operate the wiper stalk again to park the wiper blades.
See also:
Cornering lighting
With dipped or main beams, this function makes use of the beam from a front foglamp
to illuminate the inside of a bend, when the vehicle speed is below 25 mph (approximately
40 km/h) (urban driv ...
Total distance recorder
System which measures the total distance travelled by the vehicle during its
life.
The total and trip distances are displayed for thirty seconds when the ignition
is switched off, when the driv ...
Manual Check
This function allows you to check the status of the vehicle (reminder of the
active alert warnings) and the service information.
With the engine running, to start a manual check, briefly press ...