Speed limiter "LIMIT"
1. Limiter mode Selection / Off.
2. Decreasing the programmed value.
3. Increasing the programmed value.
4. Speed limiter On / Off.
The values must be set with the engine running.
See also:
Engine oil level indicator
System which informs the driver whether the engine oil level is correct or not.
This information is indicated for a few seconds when the ignition is switched on,
after the service information.
Th ...
Trip reset
When the trip required is displayed, press the control for more than two seconds
or use the left hand thumb wheel of the steering mounted controls.
Trips "1" and "2" are indep ...
Towing another vehicle
On the rear bumper, unclip the cover by pressing at the bottom.
Screw the towing eye in fully.
Install the towing bar.
Switch on the hazard warning lamps on both vehicles.
Move off gently ...