Dimensions (in mm)

Identification markings

    See also:

    Filling
    A self-adhesive label on the inner face of the filler flap reminds you of the type of fuel to use depending on your engine. Additions of fuel must be of at least 5 litres to be registered by the ...

    Changing a fuse
    Before changing a fuse: the cause of the failure must be identified and rectified, all electrical consumers must be switched off, the vehicle must be immobilised with the ignition off, ident ...

    Automatic one-touch operation
    To open or close the window, press or pull the switch fully: the window opens or closes completely when the switch is released. Pressing the switch again stops the movement of the window. The ele ...