Folding the backrest

  • Move the corresponding front seat forward if necessary.
  • Check that the corresponding seat belt is positioned correctly against the backrest and buckle it.
  • Place the head restraints in the low position.

  • Press control 1 to release the seat backrest 2 .
  • Fold the seat backrest 2 on to the cushion.
    See also:

    Changing a fuse
    Before changing a fuse: the cause of the failure must be identified and rectified, all electrical consumers must be switched off, the vehicle must be immobilised with the ignition off, ident ...

    Coolant level
    The coolant level should be close to the "MAX" mark but should never exceed it. When the engine is warm, the temperature of the coolant is regulated by the fan. This can operate with th ...

    Ventilation
    Air intake The air circulating in the passenger compartment is filtered and originates either from the outside via the grille located at the base of the windscreen or from the inside in air rec ...