Touch screen

Press MENU to display the MAIN MENU then select " Settings".

Press MENU to display the MAIN MENU then select " Settings".

Select "System configuration".

Select "System configuration".

Select "Date & Time".

Select "Date & Time".

Select the date or time displayed, use the keypad to adjust the setting, then

Select the date or time displayed, use the keypad to adjust the setting, then "Confirm".

    See also:

    Manual Check
    This function allows you to check the status of the vehicle (reminder of the active alert warnings) and the service information. With the engine running, to start a manual check, briefly press ...

    Operation
    Going into engine STOP mode The "ECO" warning lamp comes on in the instrument panel and the engine goes into standby: - with a manual gearbox , at speeds below 12 mph (20 km/h), when yo ...

    Changing a wiper blade
    Before removing a front wiper blade Within one minute after switching off the ignition, operate the wiper stalk to position the wiper blades vertically on the windscreen. Removing Raise the ...