With manual air conditioning
- Put the temperature and distribution controls to the dedicated marked position.
- Switch on the air conditioning by pressing the "A/C" button; the warning lamp in the button comes on.
See also:
Stop & Start
Going into engine STOP mode
The "ECO" warning lamp
comes on in the instrument panel and the engine goes into standby:
- with a manual gearbox , at speeds below 12 mph (20 km/h), when you ...
Changing a wheel
Procedure for changing a faulty wheel for the spare wheel using the tools provided
with the vehicle.
Access to the tools
The tools are installed in the boot under the floor.
To gain access to t ...
Engine oil level indicator
This information is displayed for a few seconds when the ignition is switched
on, after the service information.
The level shown will only be correct
if the vehicle is on level ground and the ...