Automated mode
Following use of the sequential mode, select position A to return to the automated mode.
AUTO and the gear engaged appear
in the instrument panel.
The gearbox then operates in auto-adaptive mode, without any action on the part of the driver. It continuously selects the most suitable gear for:
- optimisation of fuel consumption,
- the driving style,
- the road conditions,
- the vehicle load.
For best acceleration, when overtaking another vehicle for example, press the accelerator pedal firmly to pass the point of resistance.
See also:
Failure of the remote control
To deactivate the monitoring functions:
Unlock the vehicle using the key in the driver's door lock.
Open the door; the alarm is triggered.
Switch on the ignition; the alarm stops. The indi ...
Repair procedure
1. Sealing
Switch off the ignition.
Turn the selector A to the "sealant" position.
Check that the switch B is in position "O".
Avoid removing any foreign bodies whic ...
Operating fault
When the ignition is on, the lighting
of this warning lamp, accompanied by an audible signal and a message in the multifunction
screen, indicates a gearbox fault.
In this case, the gearbox switc ...