Operating fault
With the ignition on,
the flashing of this warning lamp and the flashing of AUTO , accompanied by an audible
signal and a message in the instrument panel screen, indicates a malfunction of
the gearbox. have it checked by PEUGEOT or a qualified workshop.
You must press the brake pedal when starting the engine. Whatever the circumstances, you must manually apply the parking brake to immobilise the vehicle.
See also:
Changing a wiper blade
Before removing a front wiper blade
Within one minute after switching off the ignition, operate the wiper stalk to
position the wiper blades vertically on the windscreen.
Removing
Raise the corre ...
Dynamic stability control (DSC)
Activation
This system is activated automatically each time the vehicle is started.
It comes into operation in the event of a grip or trajectory problem.
This is indicated by flashing of
this wa ...
Diesel engines and gearboxes
* The maximum power corresponds to the type approved value on a test bed, under
the conditions defined in European legislation (directive 1999/99/CE). ...






