Exiting economy mode

These functions are reactivated automatically next time the vehicle is driven.

To restore these functions immediately, start the engine and let it run for at least five minutes.

A flat battery prevents the engine from starting (refer to the corresponding section).

    See also:

    Electric parking brake
    Manual application / release The parking brake can be applied manually by pulling the control lever A . When the ignition is on, the parking brake can be released manually by pressing the brake ...

    Programming
    Turn thumb wheel 1 to the "CRUISE" position: the cruise control mode is selected but is not switched on (PAUSE). Set the programmed speed by accelerating to the required speed, then pre ...

    Changing a wiper blade
    Before removing a front wiper blade Within one minute after switching off the ignition, operate the wiper stalk to position the wiper blades vertically on the windscreen. Removing Raise the corre ...