Access to the tools
The towing eye is installed in the boot under the floor.
To gain access to it:
open the boot,
lift the floor and remove it,
remove the towing eye from the holder.
See also:
Service indicator zero reset
After each service, the service indicator must be reset to zero.
The procedure for resetting to zero is as follows: switch off the ignition,
press and hold the trip distance recorder zero reset bu ...
Operating fault
In the event of a malfunction
of the system, when reverse gear is engaged this warning lamp is displayed in the
instrument panel and/or a message appears in the screen, accompanied by an audible ...
Charging the battery using a battery charger
Disconnect the battery from the vehicle.
Follow the instructions for use provided by the manufacturer of the charger.
Connect the battery starting with the negative terminal (-).
Check that t ...