Bonnet
Before doing anything under the bonnet, switch off the Stop & Start system to avoid any risk of injury resulting from an automatic change to START mode.
See also:
Removal
To remove the mat on the driver's side:
move the seat as far back as possible,
unclip the fixings,
remove the mat.
Refitting
To refit the mat on the driver's side:
position the ...
Stopping the vehicle
Before switching off the engine, you can change to position N to be in neutral.
In this case, you must apply the parking brake to immobilise the vehicle. ...
Programming
Turn thumb wheel 1 to the "LIMIT" position: the speed limiter mode is selected
but is not switched on (PAUSE).
You do not have to switch the speed limiter on in order to set the speed.
...