Opening

  • Open the left hand front door.
  • Pull the release lever, located at the bottom of the door aperture, towards you.

Lift the safety catch and raise the bonnet.

Lift the safety catch and raise the bonnet.

Do not open the bonnet under very windy conditions.

When the engine is hot, handle the exterior safety catch and the stay with care (risk of burns).

Unclip the stay from its housing and place it in the support slot to hold the

Unclip the stay from its housing and place it in the support slot to hold the bonnet open.

    See also:

    Towing another vehicle
    On the rear bumper, unclip the cover by pressing at the bottom. Screw the towing eye in fully. Install the towing bar. Switch on the hazard warning lamps on both vehicles. Move off gently ...

    Engine oil level indicator
    This information is displayed for a few seconds when the ignition is switched on, after the service information. The level shown will only be correct if the vehicle is on level ground and the ...

    Boot fittings (308 SW with individual rear seats)
    1. Load space screen (see details on following page) 2. Storage box 3. 12 V accessory socket (see details on following page) 4. Hooks (see details on following page) 5. Stowing rings 6. High ...