1.4 litre HDi engine

  • Fill the fuel tank with at least five litres of diesel.
  • Open the bonnet.
  • Press and release the priming pump until resistance is felt (there may be resistance on the first press).
  • Operate the starter until the engine starts.
  • Close the bonnet.
    See also:

    Height
    Pull the control upwards to raise or push it downwards to lower, as many times as required, to obtain the position required. ...

    Changing a wiper blade
    Before removing a front wiper blade Within one minute after switching off the ignition, operate the wiper stalk to position the wiper blades vertically on the windscreen. Removing Raise the cor ...

    Diesel additive level
    A low additive level is indicated by illumination of the service warning lamp, accompanied by an audible warning and a message in the screen. Topping up This additive must be topped up by a PEUGEO ...