Head restraint adjustment
To raise the head restraint, pull it upwards. To lower it, press the lug A and down on the head restraint at the same time.
See also:
Access to the tools
The extraction tweezer is fitted to the back of the fusebox cover located inside
the glove box.
Open the glove box lid,
unclip the fusebox cover by pulling at the top right,
disengage the ...
Exceeding the programmed speed
Pressing the accelerator pedal to exceed the programmed speed will not have any
effect unless you press the pedal firmly past the point of resistance.
The speed limiter is deactivated temporarily a ...
Stop & Start
Going into engine STOP mode
The "ECO" warning lamp
comes on in the instrument panel and the engine goes into standby:
- with a manual gearbox , at speeds below 12 mph (20 km/h), when you ...