See also:

Changing a fuse
Before changing a fuse: the cause of the failure must be identified and rectified, all electrical consumers must be switched off, the vehicle must be immobilised with the ignition off, ident ...

Filling
A self-adhesive label on the inner face of the filler flap reminds you of the type of fuel to use depending on your engine. Additions of fuel must be of at least 5 litres to be registered by the ...

Exceeding the programmed speed
Intentional or unintentional exceeding of the programmed speed results in flashing of this speed in the screen. Return to the programmed speed, by means of intentional or unintentional deceleration ...