Boot fittings (308 saloon)

1. Rear parcel shelf (see details on following page)

1. Rear parcel shelf (see details on following page)
2. Hooks (see details on following page)
3. Stowing rings
4. Luggage retaining strap
5. Enclosed storage tray
6. Open storage tray
7. Storage box (see details on following page)

Rear parcel shelf

To remove the shelf:

To remove the shelf:

unhook the two cords,

raise the shelf slightly, then remove it.

There are several options for storing the shelf:

- either upright behind the front seats,
- or fl at at the base of the boot.

Hooks

The hooks can be used to secure shopping bags.

The hooks can be used to secure shopping bags.

Access to the storage box

An additional hook under the shelf is used to hold up the boot floor using Access to the storage box

An additional hook under the shelf is used to hold up the boot floor using its cord, to facilitate access to the tools and spare wheel or the temporary puncture repair kit...

Storage box

Raise the boot carpet for access to the storage box.

Raise the boot carpet for access to the storage box.

This has areas for the storage a box of spare bulbs, a first aid kit, two warning triangles...

It also contains the vehicle tools, the temporary puncture repair kit...

    See also:

    Tailgate release
    System for mechanical unlocking of the boot in the event of a central locking malfunction. Unlocking Fold back the rear seats to gain access to the lock from inside the boot. Insert a small ...

    Closing
    Take the stay out of its support slot. Clip the stay back into its housing. Lower the bonnet and release it at the end of its travel. Pull on the bonnet to check that it has latched correctly ...

    Switching the vehicle off
    Immobilise the vehicle. Turn the key fully towards you to position 1 (Stop) . Remove the key from the ignition switch. Energy economy mode After switching off the engine (position 1-Stop ), you ...