See also:

Programming
Turn thumb wheel 1 to the "CRUISE" position: the cruise control mode is selected but is not switched on (PAUSE). Set the programmed speed by accelerating to the required speed, then pre ...

Changing a fuse
Before changing a fuse: the cause of the failure must be identified and rectified, all electrical consumers must be switched off, the vehicle must be immobilised with the ignition off, ident ...

Lower tailgate
Opening Push the handle C to the right and tilt the tailgate D gently. Closing Raise the tailgate D , push it fully to close it, check that it is secured correctly. Before opening the boot, ...