Seat modularity and various configurations
Designed to be modular, your vehicle offers numerous seat installation and loading configurations.
Special features
The outer seats of the 2nd row can be moved inwards, once the central seat has been removed.
The 2nd row seats can be installed in the 3rd row.
Conversely, the 3rd row seats cannot be installed in the 2nd row.
Do not seat passengers
in the 3rd row if the 2nd row seats are in the fully folded position.
Operations to change the existing
configuration must only be carried out when stationary (see the "Rear seats" and
"Additional seats"
sections of the SW individual rear seats).
Examples of configurations
7 seats
5 seats with additional seats folded
5 seats
5 seats with 2nd row seats moved inwards
Transporting long objects
Loading a large volume
See also:
Operating fault
In the event of a cruise control malfunction, the speed is cleared resulting
in flashing of the dashes. Have it checked by a PEUGEOT dealer or a qualified workshop.
When the cruise control is swi ...
Fitting roof bars (308 SW with bench rear seat, 308 SW with individual rear
seats)
When fitting transverse roof bars, ensure that they are positioned correctly
as shown by marks under the longitudinal roof bars.
Use accessories recommended by PEUGEOT and follow the accessory ...
1.4 litre HDi engine
Fill the fuel tank with at least five litres of diesel.
Open the bonnet.
Press and release the priming pump until resistance is felt (there may be
resistance on the first press).
Operate t ...