Failure of the remote control
To deactivate the monitoring functions:
- Unlock the vehicle using the key in the driver's door lock.
- Open the door; the alarm is triggered.
- Switch on the ignition; the alarm stops. The indicator lamp in the button goes off.
Locking the vehicle without activating the alarm
Lock or deadlock the vehicle using the key in the driver's door lock.
Malfunction
When the ignition is switched on, fixed illumination of the indicator lamp in the button indicates a malfunction of the system. Have it checked by a PEUGEOT dealer or a qualified workshop.
Automatic activation
2 minutes after the last door or the boot is closed, the system is activated automatically.
To avoid triggering the alarm on entering the vehicle, first press the unlocking button on the remote control.
See also:
Automatic rain sensitive windscreen wipers
The windscreen wipers operate automatically, without any action on the part of
the driver, if rain is detected (sensor behind the rear view mirror), adapting their
speed to the intensity of the ra ...
Starting the engine
Insert the key in the ignition switch. The system recognises the starting code.
Turn the key fully towards the dashboard to position 3 (Starting).
When the engine starts, release the key. ...
Temporary puncture repair kit (308 saloon, 308 SW with individual rear
seats)
Complete system consisting of a compressor and a sealant cartridge which permits
temporary repair of a tyre so that you can drive to the nearest garage.
It is designed to repair most punctures ...