Moving off

- Select position N.
- Press the brake pedal fully.
- Start the engine.
N appears in the instrument panel.
N flashes in the instrument panel screen if the gear lever is not in position N on starting.
- Select first gear (position M or A ) or reverse (position R)
- Release the parking brake.
- Progressively take your foot off the brake pedal, then move off.
AUTO and 1 or R appear in the instrument
panel.
You must press the brake pedal while starting the engine.
Stopping - Moving off on a slope
When stopping on a slope, do not use the accelerator to immobilise the vehicle; apply the parking brake.
When moving off on a slope, accelerate gradually while releasing the parking brake.
See also:
Operating fault
With the ignition on,
the flashing of this warning lamp and the flashing of AUTO , accompanied by an audible
signal and a message in the instrument panel screen, indicates a malfunction of
the ...
Switching off
The demisting/defrosting switches off automatically to prevent an excessive consumption
of current.
It is possible to stop the demisting/ defrosting operation before it is switched
off automatica ...
Engine oil level indicator
System which informs the driver whether the engine oil level is correct or not.
This information is indicated for a few seconds when the ignition is switched on,
after the service information.
Th ...






