Automated mode
After starting the vehicle, select position A for enter automated mode.
AUTO and the gear engaged appear
in the instrument panel screen.
The gearbox is then operating in auto-active mode, without any action on the part of the driver. It continuously selects the most suitable gear, depending on the:
- style of driving,
- profile of the road.
For optimum acceleration, for example when overtaking another vehicle, press the accelerator pedal firmly past the point of resistance.
See also:
Moving off
Apply the parking brake.
Select position P or N.
Start the engine.
If this procedure is not followed, there is an audible signal, accompanied by
the display of an warning message.
With ...
Fitting roof bars (308 SW with bench rear seat, 308 SW with individual rear
seats)
When fitting transverse roof bars, ensure that they are positioned correctly
as shown by marks under the longitudinal roof bars.
Use accessories recommended by PEUGEOT and follow the accessory ...
Operation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding
system has come into operation.
Deactivation indicator lamps
If one of the following indicator lamps come ...