Maintenance
Before doing anything under the bonnet, deactivate the Stop & Start system to avoid any risk of injury resulting from automatic operation of START mode.
This system requires a battery with a special specification and technology (reference numbers available from a PEUGEOT dealer or a qualified workshop).
Fitting a battery not listed by PEUGEOT introduces the risk of malfunction of the system.
The Stop & Start system makes use of advanced technology. All work on this type of battery must be done by a PEUGEOT dealer or a qualified workshop.
See also:
Fitting roof bars
When fitting transverse roof bars, take care to position them correctly on the
retaining pins located in the door apertures.
Use accessories recommended by PEUGEOT observing the manufacturer' ...
Changing a wheel (308 SW with bench rear seat, 308 SW with individual rear
seats)
Procedure for changing a faulty wheel for the spare wheel using the tools provided
with the vehicle.
Access to the tools
The wheelbrace 1 is stowed in the boot left-hand side trim; for acces ...
Instrument panels
On switching on, the dial needles go to the extent of their travel then return
to 0.
A. With the ignition on, the needle should indicate the fuel remaining.
B. With the engine running, the assoc ...