Operating fault

In the event of a cruise control malfunction, the speed is cleared resulting in flashing of the dashes. Have it checked by a PEUGEOT dealer or a qualified workshop.
When the cruise control is switched on, be careful if you maintain the pressure on one of the programmed speed changing buttons: this may result in a very rapid change in the speed of your vehicle.
Do not use the cruise control on slippery roads or in heavy traffic. On a steep descent, the cruise control will not be able to prevent the vehicle from exceeding the programmed speed. To avoid any risk of jamming of the pedals:
- ensure that the mat is positioned correctly,
- never fit one mat on top of another.
See also:
Switching the vehicle off
Immobilise the vehicle.
Turn the key fully towards you to position 1 (Stop) .
Remove the key from the ignition switch.
Energy economy mode
After switching off the engine (position 1-Stop ), you ...
Speed limiter "LIMIT"
1. Selecting speed limiter mode.
2. Decrease the programmed value.
3. Increase the programmed value.
4. Speed limiter On / Off.
The values must be set with the engine running. ...
Operation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding
system has come into operation.
Deactivation indicator lamps
If one of the following indicator lamps come ...






