Manual air conditioning

The air conditioning can only operate with the engine running.

The air conditioning can only operate with the engine running.

1. Temperature adjustment

Turn the dial from blue (cold) to red (hot) to adjust the temperature to your

Turn the dial from blue (cold) to red (hot) to adjust the temperature to your requirements.

2. Air flow adjustment

Turn the dial from position 1 to position 5 to obtain a comfortable air flow.

Turn the dial from position 1 to position 5 to obtain a comfortable air flow.

the temperature is no longer maintained at a comfortable level. However, a slight If you place the air flow control in position 0 (deactivation of the system), the temperature is no longer maintained at a comfortable level. However, a slight flow of air, due to the movement of th

3. Air distribution adjustment

Windscreen and side windows.

Windscreen and side windows.

Windscreen, side windows and front-rear footwells.

Windscreen, side windows and front-rear footwells.

Footwells, front-rear (closing the vents increases the flow to the footwells).

Footwells, front-rear (closing the vents increases the flow to the footwells).

Central, side and rear vents.

Central, side and rear vents.

The air distribution can be adapted by placing the dial in an intermediate position.

The air distribution can be adapted by placing the dial in an intermediate position.

4. Air intake / Air recirculation

The intake of exterior air limits misting of the windscreen and side windows.

The recirculation of interior air insulates the passenger compartment from exterior odours and smoke.

Return to exterior air intake as soon as possible to prevent deterioration of the air quality and demisting performance.

Press the button to recirculate the interior air. The indicator lamp comes on

Press the button to recirculate the interior air. The indicator lamp comes on to confirm this.

Press the button again to permit the intake of exterior air. The indicator lamp goes off to confirm this.

Demisting/defrosting

Demisting/defrosting

The marking on the control panel indicates the position of the controls to quickly

The marking on the control panel indicates the position of the controls to quickly demist or defrost the windscreen and side windows: place the air intake control 4 in the "Exterior air intake" position (indicator lamp off), place the air distribution dial 3 in the "Windscreen position", place the air flow dial 2 in position 5 (maximum), place the temperature dial 1 in the red position (hot).

not available. With Stop & Start, when demisting has been activated, the STOP mode is not available.

5. Air conditioning On / Off

The air conditioning is designed to operate effectively in all seasons, with

The air conditioning is designed to operate effectively in all seasons, with the windows closed.

It enables you to:

- lower the temperature, in summer,
- increase the effectiveness of the demisting in winter, above 3 °C.

Switching on

Press the "A/C" button, the button's indicator lamp comes on.

The air conditioning does not operate when the air flow adjustment control 2 is in position " 0 ".

To obtain cooled air more quickly, you can use recirculation of interior air for a few moments. Then return to fresh air intake.

Switching off

Press the "A/C" button again, the button's indicator lamp goes off.

Switching off may affect comfort levels (humidity, condensation).

    See also:

    Access to the tools
    The tools are installed in the boot under the floor. To gain access to them: open the boot, lift the floor and remove it. remove the carrier box containing the tools. List of tools Al ...

    16/9 retractable colour screen (with peugeot connect navigation (Rt6) or Peugeot connect media navigation (Ng4 3d)
    Displays in the screen When the screen is unfolded, it displays the following information automatically and directly: - time, - date, - altitude, - ambient temperature (the value displayed fl ...

    Direction indicators
    Left: lower the lighting stalk passing the point of resistance. Right: raise the lighting stalk passing the point of resistance. If you forget to cancel the direction indicators for more than t ...