See also:

Starting the vehicle
Insert the key in the ignition switch. The system recognises the starting code. Turn the key fully towards the dashboard to position 3 (Starting) . When the engine starts, release the key. ...

Access to the tools
The extraction tweezer is fitted to the back of the fusebox cover located inside the glove box. Open the glove box lid, unclip the fusebox cover by pulling at the top right, disengage the ...

Programming
Turn thumb wheel 1 to the "CRUISE" position: the cruise control mode is selected but is not switched on (PAUSE). Set the programmed speed by accelerating to the required speed, then pre ...