Gear lever
R. Reverse
With your foot on the brake, lift the lever and push forwards.
N. Neutral.
With your foot on the brake, select this position to start.
A. Automatic mode.
Move the lever backwards to select this mode.
M. + / -. Manual mode with sequential gear changing.
Move the lever to the left to select this mode, then:
- push it forwards to change up,
- or pull it backwards to change down.
S. Sport setting.
Press this button to switch it on or off.
See also:
Moving off
Apply the parking brake.
Select position P or N.
Start the engine.
If this procedure is not followed, there is an audible signal, accompanied by
the display of an warning message.
With ...
Warning lamps
When the engine is running or the vehicle is being driven, illumination of one
of the following warning lamps indicates a fault which requires action on the part
of the driver.
Any fault resultin ...
Programming
Turn thumb wheel 1 to the "LIMIT" position: the speed limiter mode is selected
but is not switched on (PAUSE).
You do not have to switch the speed limiter on in order to set the speed.
...