Practical information

See also:

Service indicator zero reset
After each service, the service indicator must be reset to zero. The procedure for resetting to zero is as follows: switch off the ignition, press and hold the trip distance recorder zero reset bu ...

Stop & start
The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffi c (red lights, traffi c jams, or other...). The engine restarts automatically - START ...

Oil level
The check is carried out either when the ignition is switched on using the oil level indicator on the instrument panel, or using the dipstick. This manual check will only be correct if the vehicl ...